Floor Pads Spiral 1 – 5,5”/ø140mm

20 18

The best solution for Concrete, Terrazzo and Natural stones.

  • SIZE: 5,5”/ø140mm
  • GRIT: grit 400
  • Compatible with Klindex, HG, Bimack
  • Delivery 7 Working Days
  • Always Free Shipping
  • 15 days to return your order

Description

Application

A) Polished concrete, trowelled concrete and concrete overlay (like Utratop or Pandomo) polishing.
B) Marble, Terrazzo and natural stone restoration and polishing.

Can be used wet on natural stone or dry on concrete and screed. Thanks to the flexible support and its design it allows to grind, sand and hone the surface fast leaving a homogeneous finish. SPIRAL is the best solution for semi gloss, honed and matt fi nish on trowelled concrete or screed without exposing the aggregate. The best solution for concrete preparation before densification and sealing. The SPIRAL series is available in 4”, 5.5”, 8”, 9.5”, 13”, 16”, 17”, 18”, 20” and 26” size, other sizes upon request.

Technical Data

Model Grit Size Description
Spiral 000 60 5.5”/ø140mm Very abrasive grit. Great for removing big marks from power trowel machines or big scratches on natural stones
Spiral 00 120 5.5”/ø140mm Great for removing big marks from power trowel machines or big scratches on natural stones
Spiral 0 220 5.5”/ø140mm Great for removinglight marks from power trowel machines or light scratches on natural stones. It leaves the concrete surfaces ideal condition for densification or Beton Hardener
Spiral 1 400 5.5”/ø140mm To be used after Elica 0. It removes the excess of densification or Beton Hardener and leaves matt finish. It also remove minus spot or light scratches on natural stone
Spiral 2 800 5.5”/ø140mm To be used after Elica 1.It leaves honed finish
Spiral 3 1500 5.5”/ø140mm To be used after Elica 2.It leaves semi-gloss finish
Spiral 4 3000 5.5”/ø140mm To be used after Elica 3.It leaves gloss finish

Guidelines:

Dry system for Polished concrete, Polishing concrete screed and trowelled concrete, concrete overlay.

  1. Start grinding with SPIRAL 00 or SPIRAL 0 according the condition of the concrete.
  2. Apply Beton Hardener for densification.
  3. Once the Beton Hardener its completely dry, sand the floor with SPIRAL 2.

For different finishing follow the instruction below:

  • For matt finish just apply Beton Shield Plus sealer.
  • For semi gloss finish proceed with SPIRAL 3 and after apply Beton Shield Plus sealer.
  • For gloss finish proceed with SPIRAL 3 and 4 and after apply Beton Guard Lithium sealer.

For daily cleaning of floors treated as A and B in high traffic areas, use Superclean Pad with scrubber machine. Does not need chemicals, just water.
For daily cleaning of floors treated as C in high traffic areas use burnishing machine like MAC2 or MAC3 and HS polishing pad Discolux.

WET system for Marble, Terrazzo and natural stones polishing.

  1. Start grinding with SPIRAL 00 or SPIRAL 0 to remove the scratches ad refresh the surface according the condition of the floor.
  2. Hone the floor with SPIRAL 1, 2 and 3.
  3. Use Samich stone Polishing Powder S10 or SPIRAL 4 with water for a mechanical polishing process.
  4. Wash the floor with stone Stone Soap.

For daily cleaning and maintenance in high traffic areas use Superclean Pad with scrubber machine and Stone Soap cleaner.